TM 5-4310-451-14
4-76. ENGINE COOLANT TEMPERATURE GAGE REPLACEMENT (Con’t).
1.
Remove line (6) from water outlet (7).
2.
Remove two nuts (1), lockwashers (2), and bracket (3) from gage (4) and instrument panel (5). Discard
lockwashers.
3.
Remove gage (4) from Instrument panel (5).
1.
Thread line (6) through instrument panel (5) and position gage (4) In instrument panel.
2.
Install bracket (3) on gage (4) and instrument panel (5) with two new lockwashers (2) and nuts (1).
3.
Install line (6) in water outlet (7).
FOLLOW-ON TASKS:
Fill cooling system with coolant (see Lubrication Instructions, Chapter 3, Section I).
TA704839
a. REMOVAL
b. INSTALLATION
4-186
