TM 5-4310-451-14
4-75. SPRING REPLACEMENT (Con’t).
4.
Remove four locknuts (8) and screws (1) from bracket (2) and sp ring (4). Discard locknuts.
5.
Remove four nuts (7), two U-bolts (3), and bracket (6) from spring (4) and axle (5).
NOTE
Plate is present on rear springs only. Note position of plate for Installation.
6.
Remove spring (4) and plate (9) from axle (5) and bracket (2).
7.
Remove cotter pin (12), pin (10), and bracket (11) from spring (4). Discard cotter pin.
8.
Remove nut (15), screw (13), spacer (16), and bracket (14) from spring (4).
b.
INSTALLATION
1.
Install spacer (16) and bracket (14) on spring (4) with screw (13) and nut (15).
2.
Install bracket (11) on spring (4) with pin (10) and new cotter pin (12).
NOTE
Plate is present on rear springs only.
3.
Position plate (9) on spring (4).
TA704837
4-182
