TM 5-4310-451-14
4-77. TACH/HOURMETER GAGE AND CABLE REPLACEMENT (Con’t).
2.
Remove two nuts (2), lockwashers (3), and bracket (4) from instrument panel (5) and gage (6). Discard
lockwashers.
3.
Remove gage (6) from instrument panel (5).
1.
Position gage (6) in Instrument panel (5).
2.
Install bracket (4) on gage (6) and instrument panel (5) with two new lockwashers (3) and nuts (2).
3.
Install cable (1) on gage (6) and engine (7).
TA704841
b. INSTALLATION
4-188
