TM 5-4310-451-14
5-14. AIR INLET HOUSING MAINTENANCE.
This Task Covers:
a.
Removal
c.
Assembly
b.
Disassembly
d.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Engine inlet adapter and gasket removed (see
•
Two preformed packings
paragraph 4-31)
•
Three gaskets
•
Emergency stop cable disconnected (see paragraph
•
Three pins
4-39)
•
Thirteen lockwashers
Tools/Test Equipment:
•
General mechanic's tool kit
a.
REMOVAL
1.
Remove two bolts (5), lockwashers (6), and
washers (7) from air inlet housing (1). Discard
lockwashers.
2.
Remove four bolts (4), lockwashers (3), washers
(2), air inlet housing (1), and gasket (9) from
adapter (8). Discard lockwashers and gasket.
5-14
