TM 5-4310-451-14
5-15. ENGINE AND AIR COMPRESSOR REPLACEMENT (Con’t).
3.
Remove two locknuts (10) from screws (15) at rear engine mounts (12). Discard locknuts.
WARNING
Use extreme caution when handling heavy parts. Lifting device is required when parts weigh over
50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two person lift, and over 150 lb (68 kg)
for a three or more person lift. Keep lear of heavy parts supported only by lifting device. Failure
to follow this warning may cause serious Injury or death to personnel.
4.
Using suitable lifting device, raise engine (2) and air compressor (1) out of trailer.
5.
Remove four insulators (6 and 7) from crossmember (9).
6.
Remove two Insulators (11) from crossmember (9).
7.
Remove two screws (3) and washers (4) from front engine mounts (5).
8.
Remove two screws (15), plates (14), and insulators (13) from rear engine mounts (12).
CAUTION
DO NOT rest engine on oil pan. Damage to engine will result.
9.
Lower engine and air compressor onto wood blocks.
TA704903
5-19
