TM 5-4310-451-14
5-14. AIR INLET HOUSING MAINTENANCE (Cont).
6.
Position spring (27) in latch (28) and install bushing (26) through latch and spring.
7.
Install latch (28) on air inlet housing (1) with nut (25), new lockwasher (23), and bolt (24).
d.
INSTALLATION
1.
Aline two new gaskets (14) and screen (15) with mounting holes on blower housing (13).
2.
Install adapter (8) on two gaskets (14), screen (15), and blower housing (13) with six new lockwashers (12),
washers (11), and bolts (10).
3.
Install new gasket (9) and air inlet housing (1) on adapter (8) with four washers (2), new lockwashers (3), and bolts
(4).
4.
Install two washers (7), new lockwashers (6), and bolts (5) on air inlet housing (1).
FOLLOW-ON TASKS:
Install engine inlet adapter and gasket (see paragraph 4-31).
Connect emergency stop cable and adjust emergency stop control (see paragraph 4-39).
TA704902
5-17