TM 5-4310-451-14
5-15. ENGINE AND AIR COMPRESSOR REPLACEMENT (Cont).
10.
Remove lifting device and lifting sling from engine (2) and air compressor (1).
NOTE
Refer to paragraph 5-100 to remove air compressor from engine.
b. INSTALLATION
1.
Attach suitable lifting sling to engine (2) and around air compressor (1).
2.
Position two Insulators (13), plates (14), and screws (15) on rear engine mounts (12).
3.
Position two washers (4) and screws (3) on front engine mounts (5).
4.
Position four Insulators (6 and 7) on crossmember (9).
5.
Position two insulators (11) on crossmember (9).
WARNING
Use extreme caution when handling heavy parts. Lifting device Is required when parts weigh over
50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two person lift, and over 150 lb (68 kg)
for a three or more person lift. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause serious Injury or death to personnel.
6.
Using suitable lifting device, raise engine (2) and air compressor (1) off wood blocks and lower in place in trailer.
TA704904
5-20