TM 5-4310-451-14
5-23. VALVE GUIDE STEM REPLACEMENT (Con’t).
2.
With cylinder head (2) upside down, use valve
guide remover and drive valve guide stem (1)
out of cylinder head.
b.
INSTALLATION
NOTE
All 24 valve guide stems are Installed same way. This procedure covers one valve guide stem.
1.
Install threaded end of valve guide stem (1) into valve guide installer.
2.
Install valve guide stem (1) in cylinder head (2) until valve guide installer contacts cylinder head.
3.
Remove valve guide installer from valve guide stem (1).
FOLLOW-ON TASKS:
áInstall cam follower assembly (see paragraph 5-25).
TA704924
5-42
