TM 5-4310-451-14
5-25. CAM FOLLOWER ASSEMBLY AND PUSHROD REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
áCylinder head removed (see paragraph 5-28)
áMarker tags (Item 40, Appendix E)
áRocker arms removed (see paragraph 5-41)
áOne locknut
áTwo lockwashers
Tools/Test Equipment:
áGeneral mechanic’s tool kit
áField automotive shop set
a. REMOVAL
NOTE
All cam follower assemblies and parts are removed same way. This procedure covers one
cam follower assembly and parts.
Tag cam follower assembly and parts to assist In installing in original location.
2.
Remove two screws (6), lockwashers (5), and guide (1) from cylinder head (4). Discard lock- washers.
3.
Remove cam follower assembly (2) and pushrod (3) as a unit from cylinder head (4).
4.
Remove cam follower assembly (2) from pushrod (3).
5-46
