TM 5-4310-451-14
5-25. CAM FOLLOWER ASSEMBLY AND PUSHROD REPLACEMENT (Con’t).
5.
Remove locknut (9), upper spring seat (10),
spring (8), and lower spring seat (7) from
pushrod (3). Discard locknut.
NOTE
Mark direction of retaining ring to
assist In Installation.
6.
Remove retaining ring (11) from cylinder head
(4).
b. INSTALLATION
NOTE
All cam follower assemblies and parts are Installed same way. This procedure covers one cam
follower assembly and parts.
1.
Install retaining ring (11) in bore of cylinder head (4) as marked.
TA704929
5-47
