TM 5-4310-451-14
5-34. FLYWHEEL HOUSING AND REAR OIL SEAL REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
áAir compressor drive ring removed (see para-
graph 5-100)
áAdhesive (Item 1, Appendix E)
áGovernor control bracket removed (see para-
áGrease (Item 22, Appendix E)
graph 4-40)
áLubricating oil (Item 29, Appendix E)
áEngine starter removed (see paragraph 4-53)
áMarker tags (Item 40, Appendix E)
áRear engine mounts removed (see paragraph 5-16)
áOne copper washer
áFlywheel removed (see paragraph 5-33)
áOne oil seal
áEngine breather removed (see paragraph 4-30)
áOne screw
Tools/Test Equipment:
áFive gaskets
áGeneral mechanic’s tool kit
áThirty-four lockwashers
áField automotive shop set
Personnel Required: Two
áAlignment stud set
áSuitable lifting device
a. REMOVAL
1.
Aline engine lifting bracket (3) with threaded hole of screw removed from governor control bracket.
2.
Install washer (2) and screw (1) in engine lifting bracket (3) and flywheel housing (4) and attach lifting device.
5-91
