TM 5-4310-451-14
5-34. FLYWHEEL HOUSING AND REAR OIL SEAL REPLACEMENT (Cont).
NOTE
Copper washer Is used on long screw.
12.
Remove screw (40) and copper washer (39). Discard copper washer.
13.
Remove five screws (35), lockwashers (36), oil filler cover (37), and gasket (38). Discard lockwashers and gasket.
CAUTION
Screw located inside access cover hole must be removed. Failure to remove screw will cause
damage to flywheel housing.
14.
Remove screw (41) from oil filler access hole (42). Discard screw.
TA704974
5-94