TM 5-4310-451-14
5-34. FLYWHEEL HOUSING AND REAR OIL SEAL REPLACEMENT (Con’t).
3.
Remove four screws (8) and lockwashers (7). Discard lockwashers.
4.
Remove screw (10), lockwasher (9), access cover (6), and gasket (5) from flywheel housing (4). Discard
lockwasher and gasket.
NOTE
Note location of spacer when removing four screws and lockwashers to assist In Installation.
5.
Remove four screws (14) and lockwashers (15). Discard lockwashers.
6.
Remove screw (13), lockwasher (12), spacer (11), tachometer drive cover (16), and gasket (17) from flywheel
housing (4). Discard lockwasher and gasket.
NOTE
Note location of nut when removing screws to assist In Installation.
7.
Remove nut (18), four screws (22), and lockwashers (21). Discard lockwashers.
8.
Remove two screws (23), lockwashers (24), access cover (20), and gasket (19). Discard lockwashers and
gasket.
TA704972
5-92
