TM 5-4310-451-14
5-37. FRONT BALANCE COVER AND PULLEY REPLACEMENT (Con’t).
9.
Remove front balance cover (1) and gasket (25) from end plate (24). Discard gasket.
10.
Remove oil seal (26) from front balance cover (1). Discard oil seal.
b.
INSTALLATION
1.
Install new oil seal (26) in front balance cover (1)
and apply coat of lubricating oil to oil seal.
2.
Coat new gasket (25) with grease and install on front balance cover (1).
3.
Aline dowel pins (27) on front balance cover (1) with mating holes in end plate (24) and install front balance cover
on end plate.
4.
Install five washers (13), screws (14), new lockwashers (12), and nuts (11). Torque nuts to 30 lb.-ft. (41 Nom).
5.
Install two washers (23), new lockwashers (22), and screws (21). Torque screws to 90 lb.-ft. (122 Nom).
TA704997
5-118
