TM 5-4310-451-14
5-37. FRONT BALANCE COVER AND PULLEY REPLACEMENT
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Fan support removed (see paragraph 5-98).
•
Grease (Item 22, Appendix E)
•
Water pump removed (see paragraph 5-72).
•
Lubricating oil (Item 31, Appendix E)
•
Marker tags (Item 40, Appendix E)
Tools/Test Equipment:
•
One gasket
•
One oil seal
•
General mechanic's tool kit
•
Eleven lockwashers
a.
REMOVAL
1.
Remove screw (4), lockwasher (3), and engine
lifting bracket (2) from front balance cover (1).
Discard lockwasher.
2.
Remove screw (7), lockwasher (8), and washer (C
3.
Remove pulley (10) from shaft (6).
4.
Remove woodruff key (5) from shaft (6).
5-116
