TM 5-4310-451-14
5-39. CAMSHAFT MAINTENANCE.
This Task Covers:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Cylinder heads removed (see paragraph 5-28).
•
Grease (Item 22, Appendix E)
•
Flywheel housing removed (see paragraph 5-34).
•
Lubricating oil (Item 28, Appendix E)
•
Right bank cam gear removed (see paragraph 5-38).
•
Rags (Item 35, Appendix E)
•
Marker tags (Item 40, Appendix E)
Tools/Test Equipment:
•
One seal
•
General mechanic's tool kit
•
Two gaskets
•
Field automotive shop set
•
Fourteen lockwashers
a.REMOVAL
1.
Remove four screws (1), lockwashers (2), and retaining plate (3) from left camshaft gear (4) and right camshaft
gear (5). Discard lockwashers.
TA705002
5-123
