TM 5-4310-451-14
5-40. IDLER GEAR MAINTENANCE.
This Task Covers:
a.
Removal
b.
Disassembly
c.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Flywheel housing removed (see paragraph 5-34).
Tools/Test Equipment:
General mechanic's tool kit
Field automotive shop set
Gear bearing plate kit
a.
REMOVAL
1.
Remove screw (6) and special washer (1) from
Idler gear (3).
2.
Remove Idler gear (3) and component parts as
an assembly from rear end plate (4).
d.
Assembly
e.
Installation
Materials/Parts:
Lubricating oil (Item 28, Appendix E)
Dry cleaning solvent (Item 38, Appendix E)
General Safety Instructions:
Dry cleaning solvent Is flammable and must not be
used near open flame. Use only In a well-
ventilated area.
5-137