TM 5-4310-451-14
5-39. CAMSHAFT MAINTENANCE (Con’t).
20.
Install two retaining plates (3) on left camshaft gear (4) and right camshaft gear (5).
21.
Install eight screws (1) and new lockwashers (2). Torque screws to 39 lb.-ft. (53 Nom).
TA705014
22.
Check clearance between thrust washer (26) and
shoulder (33) of camshaft (6). If clearance is less
than 0.004 in. (0.102 mm), or greater than
0.018 in. (0.457 mm), replace camshaft.
5-135
