TM 5-4310-451-14
5-39. CAMSHAFT MAINTENANCE (Cont).
15
Apply light coat of lubricating oil to camshaft (6)
and install bearing (22) on camshaft.
16
Install three screws (24) and new lockwashers
(23) in bearing (22) on engine block (19).
Torque screws to 40 lb.-ft. (54 Nom).
17.
Place clean rag between left camshaft gear (4) and right camshaft gear (5).
18.
Torque nuts (7) on rear end of camshafts (6 and 8) to 325 lb.-ft. (441 Nom).
19.
Torque nut (14) on front end of camshaft (8) to 325 lb.-ft. (441 Nom).
TA705013
5-134