TM 5-4310-451-14
5-39. CAMSHAFT MAINTENANCE (Con’t)
6
Turn right camshaft gear (5) to reach threaded
holes in engine block (19).
7
Install three screws (16) and new lockwashers
(17) In two rear camshaft bearings (18). Torque
screws to 40 lb.-ft. (54 Nom).
8
Aline holes and install two bearing lock screws
(15) in camshafts (6 and 8).
9.
Apply a light coat of lubricating oil to front end of camshaft (8).
10.
Install new gasket (21) and bearing (22) on camshaft (8).
11.
Install three screws (24) and new lockwashers (23). Torque screws to 40 lb.-ft. (54 Nom).
TA708011
5-132
