TM 5-4310-451-14
5-57. FUEL INJECTOR
REPLACEMENT (Con’t).
b.
INSTALLATION
1.
Add diesel fuel to fuel inlet filter cap (5) until fuel
injector (12) is full.
2.
Aline dowel pin (11) with hole In cylinder head
(9) and install fuel injector (12) in injector hole (10) in
cylinder head.
3.
Slide control rack lever (3) into control rack (2).
CAUTION
Ensure that clamp does not Interfere with fuel
Injector or valve springs. Interference may cause
damage to components.
4.
Install clamp (8), screw (6), and convex washer
(7) on cylinder head (9). Torque screw to 25 lb.-ft. (34
Nom).
5.
Check control rack (2) for free movement. If
tight, loosen screw (6) and torque to 25 lb.-ft. (34 Nom).
FOLLOW-ON TASKS:
• Install rocker arms (see paragraph 5-41).
• Adjust exhaust valve clearance (see paragraph 5-49).
• Adjust fuel injector timing (see paragraph 5-50).
• Adjust injector rack control lever (see paragraph 5-52).
TA705055
5-183
