TM 5-4310-451-14
5-63. BLOWER ASSEMBLY REPLACEMENT (Con’t).
7.
Remove cotter pin (27) and pin (26) from control tube devises (25) in both cylinder heads (24). Discard cotterpins.
8.
Remove connecting pin (20) and fuel rod connecting pin (19) from governor (18).
9.
Remove two fuel control rods (23) through cylinder heads (24).
10.
Loosen two clamps (21) on each side of governor (18) and slide hoses (22) on qovernor.
11.
Remove two screws (29) and washers (30) from blower assembly (31).
TA705081
5-210
