TM 5-4310-451-14
5-62. BLOWER OIL PIPE AND FITTING REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
· Master battery switch In OFF position.
· One preformed packing
· Engine cool.
Tools/Test Equipment:
* General mechanic's tool kit
a.
REMOVALI
1. Loosen nut (4) from adapter (6).
2. Disconnect oil pipe (3) from blower drive support (1).
3. Remove oil pipe (3), preformed packing (5), and adapter (6) from cover (2). Discard preformed packing.
4. Remove nut (4) from oil pipe (3).
b.
INSTALLATION
1. Place nut (4) on oil pipe (3).
2. Install adapter (6) in cover (2).
3. Position new preformed packing (5) and oil pipe (3) on adapter (6).
4. Connect oil pipe (3) to blower drive support (1).
5. Tighten nut (4) on adapter (6).
FOLLOW-ON TASKS:
•
Start engine (see paragraph 2-10) and check for oil leaks.
TA705078
5-207
