TM 5-4310-451-14
5-61. BLOWER ACCESSORY DRIVE HUB REPLACEMENT (Con’t).
c.
INSTALLATION I
1.
Install two plates (17) on drive hub (18) with three new lockwashers (16) and screws (15).
2.
Install drive hub (18) and two plates (17) as an assembly in rear housing (14) with three new lockwashers (20) and
screws (19). Torque six screws (15 and 19) to 35-39 lb.-ft. (47-53 N.m).
3.
Install spring (13) in drive shaft (12) and install in drive adapter (11).
4.
Push in on drive shaft (12) and install retaining ring (10) in drive adapter (11).
TA70576
5-205
