TM 5-4310-451-14
5-74.
ENGINE STARTER TESTING (Con’t).
3.
Remove two inspection plugs (4) and gaskets (5) from engine starter (1). Discard gaskets.
4.
Inspect two inspection plugs (4) for damage. Replace if damaged.
5.
Set multimeter to RX1 scale and check continuity between two field leads (3). If multimeter reads 10 ohms or
more, repair engine starter (see paragraph 5-75).
6.
Set multimeter to RX10,000 scale. Check continuity between each field lead (3) and engine starter (1). If
multimeter reads anything except infinity, repair engine starter (see paragraph 5-75).
7.
Set multimeter to RX1 scale. Check continuity
between terminal (7) and terminal (9). If
multimeter reads more than 10 ohms, replace
engine starter solenoid (see paragraph 5-77).
8.
Set multimeter to RX10,000 scale. Check
resistance between terminal (9) and solenoid (8).
Check continuity between terminal (6) and
solenoid. Check resistance between terminal (7)
and solenoid. If multimeter reads anything
except infinity for any of the three checks,
replace engine starter solenoid (see paragraph
5-77).
TA705170
5-304
