TM 5-4310-451-14
5-74.
ENGINE STARTER TESTING (Con’t).
c.
LOCK TORQUE TEST
1.
Position engine starter in test stand as Illustrated. Engine starter should be securely mounted and brake arm
hooked to starter gear.
CAUTION
Ensure that brake arm does not slip off starter gear during test when current Is applied. Failure to
follow this caution could cause damage to equipment.
2.
Lock torque test is 32 lb.-ft. (43 Nom) at 500 amps at approximately 3 volts. If measurements are not met, repair
engine starter (see paragraph 5-75).
TA705172
FOLLOW-ON TASKS:
•
Install engine starter (see paragraph 4-53).
5-306
