TM 5-4310-451-14
5-76. ENGINE STARTER SOLENOID REPLACEMENT (Con’t).
3.
Remove four screws (7) from starter solenoid (3)
TM 5-4310-451-14 and engine starter (6).
4.
Remove terminal connector (8) and starter solenoid (3) from engine starter (6).
b. INSTALLATION
1.
Position starter solenoid (3) and terminal connector (8) on engine starter (6).
2.
Install four screws (7) on starter solenoid (3) and engine starter (6).
3.
Install two new lockwashers (5) and nuts (4) on starter solenoid (3) and engine starter (6).
4.
Install electrical lead (1) on starter solenoid (3) with screw (2).
TA705197
FOLLOW-ON TASKS:
Lubricate engine starter (see Lubrication Instructions, Chapter 3, Section 1).
Connect battery cables (see paragraph 4-60).
5-331/(5-332 Blank)
