TM 5-4310-451-14
5-80. FRAME ASSEMBLY REPLACEMENT (Con’t).
11.
Discard frame assembly (1).
b.
INSTALLATION I
1.
Position new frame assembly (1) on suitable supports.
2.
Install springs (see paragraph 4-75).
3.
Install front axle (see paragraph 4-62).
4.
Install rear axle (see paragraph 4-63).
5.
Install handbrake lever and cable (see paragraph 4-64 and 4-65).
6.
Install oil separator and fuel tank support (see paragraph 5-99).
7.
Install rear frame (see paragraph 5-88).
8.
Install oil separator (see paragraph 5-102).
9.
Install right and left side fenders (see paragraphs 5-92 and 5-93).
10.
Install air compressor oil cooler (see paragraph 5-105).
11.
Install engine and air compressor (see paragraph 5-15).
5-81. FRAME REPAIR.
Refer to TB 9-2300-247-40 for Instructions on frame repair.
TA705199
5-338
