TM 5-4310-451-14
5-78. BRAKEDRUM REPAIR (Cont).
b. REPAIR
WARNING
DO NOT use brakedrum that exceeds maximum wear specifications. Failure to follow this warning
may result In brake failure and serious injury or death.
1.
Reface braking surface (6) with brakedrum lathe, removing a maximum of 0.01 in. (0.25 mm) per cut.
2.
Discard brakedrum (1) if inside diameter exceeds 15.23 in. (38.68 cm) after repair.
FOLLOW-ON TASKS:
Install hub and brakedrum (see paragraph 4-69).
5-79. TIRE REPAIR.
Refer to TM 9-2610-200-14 for Instructions on tire repair.
5-335/(5-336 Blank)