TM 5-4310-451-14
5-94. OIL SEPARATOR BOTTOM COVER REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
áOil separator drain valve removed (see para-
áGeneral mechanic’s tool kit
graph 4-94).
áOil separator and fuel tank supports removed (see
paragraph 599).
a. REMOVAL
Remove 16 screws (3) and oil separator bottom cover
(1) from two fender panels (4) and body (2).
b. INSTALLATION
Install oil separator bottom cover (2) on two fender
panels (4) and body (2) with 16 screws (3).
FOLLOW-ON TASKS:
Install oil separator drain valve (see paragraph 4-94).
Install oil separator and fuel tank supports (see paragraph 5-99).
TA705218
5-364
