TM 5-4310-451-14
5-97. LIFT BAIL REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
áCenter roof panel removed (see paragraph 5-85).
áTwelve capscrews
Tools/Test Equipment:
áTwelve locknuts
áGeneral mechanic’s tool kit
Personnel Required: Two
áField automotive shop set
áSuitable lifting device
a. REMOVAL
1.
Attach a suitable lifting device to lift bail (4).
2.
Remove two bolts (8), washers (6), and nuts (5) and disconnect two radiator supports (7) from lift bail (4).
3.
Remove 12 locknuts (2) and capscrews (3) from lift bail (4) and frame (1). Discard capscrews and locknuts.
4.
Using lifting device, remove lift bail (4) from frame (1).
5.
Remove lifting device from lift bail (4).
5-368
