TM 5-4310-451-14
5-96. BUMPER REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
áHandbrake lever removed from bumper (see para
áFive locknuts
graph 4-64)
áEight lockwashers
Tools/Test Equipment:
áGeneral mechanic’s tool kit
Personnel Required: Two
áField automotive shop set
áSuitable lifting device
a. REMOVAL
1.
Attach suitable lifting device to bumper (4).
2.
Remove eight nuts (2), lockwashers (3), and bolts (5) from bumper (4) and frame (1). Discard lockwashers.
3.
Lower bumper (4) and remove from under frame (1).
4.
Remove five locknuts (8) and bolts (6) from bumper (4) and bracket (7). Discard locknuts.
b. INSTALLATION
1.
Install five bolts (6) and new locknuts (8) on bumper (4) and bracket (7).
2.
Place bumper (4) under frame (1) and raise into position with suitable lifting device.
3.
Install eight bolts (5), new lockwashers (3), and nuts (2) on bumper (4) and frame (1).
4.
Remove lifting device from bumper (4).
5-366
