TM 5-4310-451-14
5-97. LIFT BAIL REPLACEMENT (Con’t).
b. INSTALLATION
1.
Attach suitable lifting device to lift bail (4).
2.
Using suitable lifting device, position lift bail (4) on frame (1).
3.
Loosely install 12 new capscrews (3) and new locknuts (2) on lift bail (4) and frame (1).
4.
Connect two radiator supports (7) to lift bail (4) with two nuts (5), washers (6), and bolts (8).
5.
Tighten 12 locknuts (2).
6.
Remove lifting device from lift bail (4).
FOLLOW-ON TASKS:
Install center roof panel (see paragraph 5-85).
5-369
