TM 5-4310-451-14
5-104.
MINIMUM PRESSURE VALVE REPLACEMENT (Con’t).
4.
Install two threaded rods (12) and nuts (13) on
cover (1). Tighten nuts to secure cover.
5.
Remove two capscrews (10) and lockwashers
(11) from cover (1). Discard lockwashers.
WARNING
Minimum pressure valve cover is
under spring tension. Use care when
releasing pressure on cover. Cover
may spring up and cause Injury to
personnel.
6.
Remove two nuts (13) slowly and evenly.
7.
Remove two threaded rods (12) from cap (1).
8.
Remove cover (1), Inner spring (14), and outer
spring (15) from housing (4).
TA 705233
5-385
