TM 5-4310-452-14
4-20. OIL LINE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Four copper washers
• Left door assembly open.
• Oil filter base assembly removed (see para-
Tools/Test Equipment:
graph 4-19).
graph 4-19).
• General mechanic's tool kit
• Oil cooler removed (see paragraph 4-17).
• Metering fuel pump removed (see paragraph
4-22).
a.
REMOVAL
1.
Remove 2 fluid passage bolts (1) and 4 copper
washers (2) from oil line (4). Discard copper
washers.
2.
Remove oil line (4) from fuel injection pump (3).
b.
INSTALLATION
1.
Position oil line (4) on fuel injection pump (3).
2.
Install 2 fluid passage bolts (1) and 4 new cop-
per washers (2) in oil line (4) and fuel injection
pump (3).
FOLLOW-ON TASKS:
• Install oil filter base assembly (see paragraph 4-19).
• Install metering fuel pump (see paragraph 4-22).
• Install oil cooler (see paragraph 4-17).
• Close left door assembly.
4-35/(4-36 Blank)
