TM 5-4310-452-14
4-18. ENGINE OIL FILTER ELEMENT REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Dry cleaning solvent (Item 3, Appendix E)
• Left door assembly open.
• Lubrication oil (Item 8, Appendix E)
Tools/Test Equipment:
• Rag (Item 11, Appendix E)
• General mechanic's tool kit
• One oil filter element
• Filter strap wrench
General Safety Instructions:
• Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
a.
REMOVAL
1.
Remove oil filter element (2) from filter base
assembly (1) with filter strap wrench.
Discard oil filter element.
WARNING
Dry cleaning solvent P-D-680 is toxic
and
flammable.
Always
wear
protective goggles and gloves, and
use only in a well-ventilated area.
Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors.
DO NOT use near open flame or
excessive heat. The solvent's flash
point is 100°F-130°F (38°C-59°C). If
you
become
dizzy
while
using
cleaning solvent, immediately get
fresh air and medical help. If solvent
contacts eyes, immediately wash
your eyes and get medical aid.
2.
Clean dirt and grease from filter base
assembly (1) with dry cleaning solvent and a
rag.
4-31
