TM 5-4310-452-14
4-19. OIL FILTER BASE ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Sealing compound (Item 12, Appendix E)
• Left door assembly open.
• One gasket
• Engine oil filter element removed (see para-
• Five copper washers
graph 4-18).
• Fuel filter element removed (see paragraph 4-26). Tools/Test Equipment:
General mechanic's tool kit
a.
REMOVAL
1.
Remove 2 fluid passage bolts (1 and 10) and 5 copper washers (2 and 9) from 2 fuel lines (11), fuel line (14),
and filter base assembly (3). Discard copper washers.
2.
Remove oil line (8) from tee (5), elbow (6), and restrictor (7).
3.
Remove 2 bolts (13) and washers (12) from filter base assembly (3).
4.
Remove filter base assembly (3) and gasket (4). Discard gasket.
5.
Remove tee (5), elbow (6), and restrictor (7) from filter base assembly (3).
4-33
