TM 5-4310-452-14
4-45. LIGHT SWITCH REPLACEMENT.
This Task Covers:
a. Inspection
c. Installation
b. Removal
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
• Engine off.
• General mechanic's tool kit
• Battery cables disconnected (see paragraph
• Multimeter
4-57).
• Left door assembly open.
a.
INSPECTION
1.
Remove 2 electrical leads (3) from switch terminals
(4). Visually inspect switch (2) for damaged or
broken switch terminals.
2. Using multimeter, test switch (2) for continuity and
function. Replace switch if damaged or defective.
b.
REMOVAL
1.
Unscrew nut (5) from switch (2). Remove switch
from control panel (1).
c.
INSTALLATION
1.
Position switch (2) in place in control panel (1) and install nut (5).
2.
Install 2 electrical leads (3) on switch terminals (4).
FOLLOW-ON TASKS:
• Connect battery cables (see paragraph 4-57).
• Close left door assembly.
TA505475
4-89
