TM 5-4310-452-14
4-49. CONTROL PANEL REPLACEMENT (Con't).
3.
Remove access door (7) and hinge (6) from control panel (2).
4.
Using electric drill and 1/8 in. twist drill bit, remove 7 rivets (4) from housing (3) and control panel (2).
5.
Remove control panel (2) from housing (3). Discard rivets (4).
NOTE
Perform step 6 only if access door or hinge is damaged,
6.
Using electric drill and 1/8 in. twist drill bit, remove 2 rivets (8) from hinge (6) and access door (7), Discard damaged
part and rivets.
b.
INSTALLATION
NOTE
Perform step 1 only if hinge or access door is new.
1.
Position hinge (6) on access door (7). Using rivet gun, install 2 new rivets (8).
2.
Position control panel (2) in place in housing (3). Using rivet gun, install 7 new rivets (4),
3.
Position hinge (6) and access door (7) in place on control panel (2). Using rivet gun, install 3 new rivets (5)
4.
Install identification marker (1) in control panel (2).
4-94
