TM 5-4310-452-14
4-54. ENGINE OIL PRESSURE GAGE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
• Engine off.
• General mechanic's tool kit
• Left door assembly open.
• Battery cables disconnected (see paragraph
4-57).
• Oil pressure switch removed (see para-
graph 4-41).
a. REMOVAL
1.
Remove window (see paragraph 4-55).
2.
Remove hose (8) from tee (4). Remove elbow (7),
tee, and adapter (3) from engine oil pressure gage
(1).
3.
Remove 2 knurled nuts (6) and retainer (5) from
engine oil pressure gage (1), Remove engine oil
pressure gage from indicator panel (2),
b.
INSTALLATION
1.
Position engine oil pressure gage (1) in place in indicator panel (2). Install retainer (5) and 2 knurled nuts (6) on
engine oil pressure gage.
2.
Install adapter (3), tee (4), and elbow (7) on engine oil pressure gage (1),
3.
Install hose (8) on tee (4).
4.
Install window (see paragraph 4-55).
FOLLOW-ON TASKS:
• Install oil pressure switch (see paragraph 4-41).
• Connect battery cables (see paragraph 4-57).
• Close left door assembly.
TA505485
4-100
