TM 5-4310-452-14
4-58. TRAILER LIGHTS REPLACEMENT (Con't).
c. REMOVAL OF MARKER LIGHT
NOTE
• There are 19 marker lights (7) on the compressor unit as follows:
• 7 marker lights with red lens covers (6), located on the tailboard (1) and rear
toolboxes (13).
• 4 marker lights with amber lens covers (15), located on the front toolboxes (16).
• ·8 marker lights with military blackout lens covers (14), located on the front and
rear toolboxes (13 and 16).
• Marker light (7) on tailboard (1) with red lens cover (6) is shown,
1.
Remove 2 screws (12) and lens cover (6) from marker light (7).
2.
Remove 4 screws (10), marker light (7), and gasket (9).
3.
Disconnect electrical lead (8).
4.
Remove incandescent lamp (11) from marker light (7).
d.
INSTALLATION OF MARKER LIGHT
1.
Install incandescent lamp (11) in marker light (7).
2.
Connect electrical lead (8).
3.
Position marker light (7) and gasket (9) in place and install 4 screws (10).
4.
Install lens cover (6) on marker light (7) with 2 screws (12).
4-110
