TM 5-4310-452-14
4-59. SOLENOID VALVE REPLACEMENT.
This Task Covers.
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•· Engine off.
• One gasket
• Left door assembly open,
• Battery cables disconnected (see paragraph
Tools/Test Equipment:
4-57).
• General mechanic's tool kit
a.
REMOVAL
1.
Loosen
screw
(2)
and
disconnect
electrical
connector (3) from solenoid valve (6).
2.
Disconnect fuel line (7) from adapter (8).
3.
Remove fluid passage bolt (4), 2 washers (5), and
solenoid valve (6) from injection pump (1).
4.
Remove adapter (8) and gasket (9) from solenoid
valve (6). Discard gasket.
b.
INSTALLATION
1.
Install adapter (8) and new gasket (9) on solenoid
valve (6).
2.
Install solenoid valve (6), 2 washers (5), and fluid
passage bolt (4) on injection pump (1).
3.
Connect fuel line (7) to adapter (8).
4.
Connect electrical connector (3) to solenoid valve
(6) and tighten screw (2).
FOLLOW-ON TASKS:
• Close left door assembly.
TA505495
4-112
