TM 5-4310-452-14
4-60. SLAVE RECEPTACLE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• One lockwasher
• Right door assembly open,
• One self-locking nut
• Storage batteries removed (see paragraph 4-57).
Tools/Test Equipment:
• General mechanic's tool kit
a.
REMOVAL
1
Remove capscrew (1) and electrical lead (2) from
slave receptacle (6).
2.
Remove capscrew (5) and battery cable (4) from
slave receptacle (6).
3.
Remove 4 screws (7), nuts (3), and slave receptacle
(6).
4.
Remove capscrew (8), lockwasher (9), electrical
lead (2), and self-locking nut (10). Discard
lockwasher and self-locking nut.
b.
INSTALLATION
1.
Install capscrew (8), new lockwasher (9), electrical
lead (2), and new self-locking nut (10).
2.
Position slave receptacle (6) in place and install 4
screws (7) and nuts (3),
3.
Install capscrew (5) and battery cable (4) on slave
receptacle (6).
4.
Install capscrew (1) and electrical lead (2) on slave
receptacle (6).
FOLLOW-ON TASKS:
• Install storage batteries (see paragraph 4-57).
• Close right door assembly,
TA505496
4-113
