TM 5-4310-452-14
4-79. TOOL BOX MAINTENANCE (Con't).
b.
DISASSEMBLY OF TOOL BOX
NOTE
To disassemble front tool boxes, begin with step 1.
To disassemble rear tool boxes, go to step 3.
1.
Remove chock (17) from retaining strap (20).
Remove 2 bolts (19), nuts (18), and retaining strap
from tool box (8).
2.
Remove screw (23), tie-down strap (24), washer
(22), and nut (21) from retaining strap (20).
3.
Remove 5 screws (3), nuts (5), and cover (2) from
tool box (8).
4.
Remove 4 screws (9), nuts (1), and light shield (12)
from tool box (8).
5.
Remove 2 capscrews (16), lid supports (13), self-
locking nuts (14), and 4 spring washers (15) from
tool box (8). Discard self-locking nuts.
6.
Remove electrical bushing (11) from tool box (8) .
c.
ASSEMBLY OF TOOL BOX
1.
Install electrical bushing (11) in tool box (8).
2,
Install 2 lid supports (13), new self-locking nuts (14), and 4 spring washers (15) on capscrews (16) in tool box (8) .
3.
Install 4 screws (9), nuts (1), and light shield (12) in tool box (8).
4.
Install 5 screws (3), nuts (5), and cover (2) on tool box (8),
5.
Install screw (23), nut (21), washer (22), and tie-down strap (24) on retaining strap (20).
6.
Position retaining strap (20) in place on tool box (8) and install 2 bolts (19) and nuts (18). Install chock in retaining
strap and secure with tie-down strap (24).
TA505523
4-157