TM 5-4310-452-14
4-79. TOOL BOX MAINTENANCE (Con't).
4.
Remove drill rod box (27) from frame.
5.
Remove screw (41), nut (35), and mending plate (34) from left rear tool box.
f.
DISASSEMBLY OF DRILL ROD BOX
1.
Remove 7 screws (26) and nuts (28) from drill rod box (27). Separate drill rod storage box.
2.
Remove 3 screws (36), nuts (38), and lockwashers (37) from drill rod box (27) and cover (32). Remove cover and
discard lockwashers.
3.
Remove 2 screws (30), nuts (33), and clamping catch (31) from drill rod box (27).
g.
ASSEMBLY OF DRILL ROD BOX
1.
Install 2 screws (30), nuts (33), and clamping catch (31) on drill rod box (27).
2.
Install 3 screws (36), nuts (38), new lockwashers (37), and cover (32) on drill rod box (27).
3.
Position drill rod box (27) together and install 7 screws (26) and nuts (28).
h.
INSTALLATION OF DRILL ROD BOX
1.
Install screw (41), nut (35), and mending plate (34).
2.
Position drill rod box (27) in place on frame.
3.
Install 3 bolts (40) and nuts (39) in drill rod box (27) and frame.
4.
Install 3 bolts (25) and nuts (29) in drill rod box (27) and left rear tool box.
5.
Install 2 bolts (25) and nuts (29) in drill rod box (27) and left front tool box.
4-159
