TM 5-4310-452-14
5-9. VIBRATION DAMPER AND V-BELT PULLEY REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Engine off.
Lubricating oil (Item 7, Appendix E)
Battery cables disconnected (see paragraph
4-57).
Tools/Test Equipment:
Alternator belt removed (see paragraph 4-37).
Blower assembly fan belt r emoved (see para-
General mechanic's tool kit
graph 4-33).
Pulley holding tool (003-0446)
a.
REMOVAL
NOTE
Pulley bolt has left-hand threads.
1.
Using pulley holding tool, hold pulley (4) in place and remove bolt (6) and washer (5).
2.
Remove pulley (4) and vibration damper (3).
3.
Remove 8 bolts (1), washers (2), and vibration damper (3) from pulley (4).
5-23