TM 5-4310-452-14
5-9.
VIBRATION DAMPER A ND V-BELT PULLEY REPLACEMENT (Con't).
b.
INSTALLATION
1.
Position vibration damper (3) in place on pulley (4). Install 8 bolts (1) and washers (2).
2.
Apply a light coat of lubricating oil on seal (7) in front cover.
3.
Position pulley (4) on crankshaft gear so hole in pulley alines with pin in crankshaft gear.
4.
Install bolt (6) and washer (5) in pulley (4).
FOLLOW-ON TASKS:
Install blower assembly fan belt (see paragraph 4-33).
Install alternator belt (see paragraph 4-37).
Connect battery cables (see paragraph 4-57).
TA505570
5-24