TM 5-4310-452-14
5-22. STARTER MOTOR REPAIR (Con't).
6.
Install studs (20) in end housing (31). Slide winding (4) onto armature (21).
7.
Install brushes (17) on retainer (6) with screws (15) and washers (16).
8.
Install retainer (6), 4 springs (14), and sleeve bushing (7).
9.
Position end plate (8) in place and install 2 washers (19) and nuts (18) on studs (20).
10. Position capsule (12), new preformed packing (11), circlip (10), and spacers (9) in place and install 2 capscrews (13).
11. Position solenoid (5) in place on end housing (31). Install 3 screws (2).
FOLLOW-ON TASKS:
• Install starter motor (see paragraph 4-39).
TA505588
5-51
