TM 5-4310-452-14
5-36. OIL TEMPERATURE BYPASS VALVE MAINTENANCE.
This Task Covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Compressor oil lines and fittings removed (see
• One preformed packing
paragraph 4-86).
• Four gaskets
Tools/Test Equipment:
• General mechanic's tool kit
a. REMOVAL
1.
Remove 2 screws (3), 2 screws (6), 4 screws (5), and washers (4).
NOTE
After removing oil temperature bypass valve, clean all gasket material off oil temperature bypass
valve and oil cooler.
2.
Remove oil temperature bypass valve (2) and 2 gaskets (1) from oil cooler. Discard gaskets.
b. DISASSEMBLY
NOTE
Clean access cover and outer body of gasket material.
1.
Separate access cover (7) and gasket (9) from outer body (10). Discard gasket.
2.
Remove thermostat (8).
5-89
