TM 5-4310-452-14
5-37. OIL COOLER REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Compressor fan and fan drive removed (see
One preformed packing
paragraph 4-92).
Two rubber strips
Compressor oil lines and fittings removed (see
paragraph 4-86).
Tools/Test Equipment:
Oil temperature bypass valve removed (see
paragraph 5-36).
General mechanic's tool kit
Front end panel assembly removed (see para-
graph 4-82).
a. REMOVAL
1.
Remove 8 screws (13) and nuts (3) from fan shroud (12) and oil cooler (2).
2.
Remove 4 screws (10) and lift fan shroud (12) from oil cooler (2),
3.
Remove 8 screws (5) and nuts (1) from oil cooler (2).
4.
Remove 8 screws (11), nuts (8), and oil cooler (2) from rear wall baffle (4).
5-91